barbas Gas Fire Front 70-60 PF2 Скачать руководство пользователя страница 51

Страница: 51 / 84

Maintenance

6.1

Annual maintenance

•

Do all procedures in this section minimum every year.

Caution:

• Use only original parts. Individual parts for replacement or accessories

are available from your Barbas dealer.

• Introduced modi

cations to the appliance are not permitted.

6.1.1

Clean the appliance

Safety conditions

Caution:

• Turn off the gas supply to the appliance before cleaning.
• Turn off the power supply to the appliance before cleaning.

Procedure

Remove the glass. Refer to chapter

6.2

Remove the content from the burner bed.

Clean the removed content carefully with a soft brush.

Clean the inside of the appliance, including the main burner, the pilot light burner and
the flue system.

Maintenance

Gas Fire Front 70-60

Содержание Gas Fire Front 70-60 PF2





















































































Результаты поиска

Содержание Gas Fire Front 70-60 PF2

Отзывы:

Похожие инструкции для Gas Fire Front 70-60 PF2

Бренды по названию

Популярные бренды

barbas Gas Fire Front 70-60 PF2, Руководство по установке и обслуживанию

Результаты поиска

Содержание Gas Fire Front 70-60 PF2

Отзывы:

Похожие инструкции для Gas Fire Front 70-60 PF2

Бренды по названию

Популярные бренды