barbas Cuatro-7 75-60, Руководство по установке и обслуживанию

Страница: 48 / 76

10.6.2 Install the cast iron side panels
Only do this procedure after finish of the procedure in section 10.6.1 .
1. Put the top of a cast iron side panel
in the U-shaped holder (1).
2. Move the panel to a vertical position
(2).
3. Lower the panel (3).
4. Repeat this procedure for the other
cast iron side panels.
10.6.3 Install the steel bottom plates
Only do this procedure after finish of the procedure in section 10.6.2 .
1. Put a steel bottom plate on the
bottom of the combustion chamber.
2. Move the steel bottom plate to the
left as much as possible.
3. Put the other steel bottom plate on
the bottom of the combustion
chamber.
4. Move the steel bottom plate to the
right as much as possible.
10.6.4 Install the cast iron rear panels
Only do this procedure after finish of the procedure in section 10.6.3 .
Note: Install the fitting piece last.
Maintenance
48 Cuatro-7 75-60