barbas Cuatro-7 75-60, Руководство по установке и обслуживанию

Страница: 35 / 76

8.7.2 Connection on the combustion air box
1. Identify the location in the outer wall or in the floor (to a ventilated crawl space) for
the external combustion air supply inlet.
2. Make a hole in the outer wall or floor with a diameter of minimum 125 mm.
3. Install a grate in the hole in the outer wall. A grate is not needed when the
combustion air supply comes from the crawl space under the floor.
Note: The image shows the combined convection ventilator / combustion
air inlet box.
4. If applicable, select one of the 3 inlet
openings on the left, right or bottom
of the optional combustion air inlet
box or the convection ventilator /
combustion air inlet box .
5. Remove the break out plate in the
selected inlet opening of the optional
convection air/ combustion air inlet
box with a hammer.
6. Put the collar adaptor in the open
inlet opening (1).
7. Bend out the 3 lips on the collar
adaptor (2) and turn the adapter until
it locks.
8. Connect a flexible aluminum pipe
©
)
with a diameter of 125 mm on the
collar adaptor. Use a hose clamp (B).
9. Connect the other end of the flexible
aluminum pipe with the hole in the
floor or the grate in the wall. Use a
suitable connector.
2
2
1
A
B
C
Installation in a new fireplace
Cuatro-7 75-60 35