8
BARACUDA | TITAN 2 ECO 3
| Installation & Operating Instructions
OPERATION, MAINTENANCE & CARE
8
BARACUDA |
TITAN 2 ECO 3
|
Installation & Operating Instructions
OPERATION, MAINTENANCE AND CARE
o
Switch the pump off before doing any
maintenance, cleaning or other work.
o
Only perform maintenance/care work that
is mentioned in the instruction manual.
•
All other work must be performed by a qualified person.
•
In the interest of safety and reliability, only use genuine
Baracuda spare parts, in the event that pirate spare parts
are used, the warranty will become null and void.
•
Never run the pump dry, i.e. without water in pump wet end,
as this will damage the pump.
•
It is important to clean the pump leaf basket regularly.
•
Clean plastic parts with a damp cloth. Cleaning agents can cause
damage to the plastic parts.
•
Do not spray down the electrical components with water.
• Suction pipe
length = 4 x (2)
• Suction pipe too short
• Risk of cavitation
• Air retention
• Risk of incorrect
pre- filter filling
ELECTRICAL INSTALLATION
A separate time clock or saltwater chlorinator with a timer is recommended to
control the On/Off functions.
8
BARACUDA |
TITAN 2 ECO 3
|
Installation & Operating Instructions
OPERATION, MAINTENANCE AND CARE
o
Switch the pump off before doing any
maintenance, cleaning or other work.
o
Only perform maintenance/care work that
is mentioned in the instruction manual.
•
All other work must be performed by a qualified person.
•
In the interest of safety and reliability, only use genuine
Baracuda spare parts, in the event that pirate spare parts
are used, the warranty will become null and void.
•
Never run the pump dry, i.e. without water in pump wet end,
as this will damage the pump.
•
It is important to clean the pump leaf basket regularly.
•
Clean plastic parts with a damp cloth. Cleaning agents can cause
damage to the plastic parts.
•
Do not spray down the electrical components with water.
• Suction pipe
length = 4 x (2)
• Suction pipe too short
• Risk of cavitation
• Air retention
• Risk of incorrect
pre- filter filling
ELECTRICAL INSTALLATION
A separate time clock or saltwater chlorinator with a timer is recommended to
control the On/Off functions.