3
BARACUDA | TITAN 2 ECO 3
| Installation & Operating Instructions
IMPORTANT SAFETY INSTRUCTIONS
3
BARACUDA |
TITAN 2 ECO 3
|
Installation & Operating Instructions
IMPORTANT SAFETY INSTRUCTIONS
Warning: Please make sure you observe the following safety
instructions. Failure to observe the safety instructions may result in
fatal injury.
Please read this instruction manual before using the product for the
first time and keep in a safe place for future reference.
• In order to provide a hassle-free experience, we recommend the use of a
qualified technician to complete the installations of our products, and to
ensure that the installation complies with all relevant regulations.
• Please note - the electrical connection should be completed by a certified
electrician (any non-compliance will result in the warranty being voided).
• Installations must conform to SANS 10142 and all relevant local by-laws.
• The pump must be supplied through a residual current device (RCD) with
a rated residual operating current not exceeding 30mA
in accordance with IEC 60335-2-41.
• Do not modify the terminal lid and/or box of the pump.
• The motor is initially supplied with an electrical cable which may be used
for testing purposes only (please follow the guidelines in SANS 10142 for
installation).
• The pump must be installed in a weatherproof, well ventilated enclosure.
• Allow sufficient space around the pump for ventilation and do not obstruct the
motor fan.
• It is imperative that you do not store pool chemicals in this enclosure.
• The pump motor’s Ingress Protection (IP) rating is indicated on the information
plate situated on the pump. Please note - the pump is not submersible.
• Never run the pump dry, i.e. without water in the pre-filter.
• This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are under supervision or instruction concerning use of
the product by a person responsible for their safety.
• Children should be supervised, at all times to ensure they do not play with or
near the product.
• Only a qualified person/s, should perform repairs and/or maintenance
work on the pump and motor, including any cabling work to the motor.