7
BARACUDA | TITAN 2 ECO 3
| Installation & Operating Instructions
7
BARACUDA |
TITAN 2 ECO 3
|
Installation & Operating Instructions
HYDRAULIC CONNECTIONS
Respect the direction of hydraulic connection. (See page image.)
• Choose the dimension of the pipes according to the size of the pool and
respecting the hydraulic rules which apply in the country of installation.
• For hydraulic connections, use either of the provided unions and the
respective 50/63mm reducer to the respective pipe diameter.
Fit a check valve if the filter is installed above the water level.
• Fit suction and discharge isolation valves if the pump is installed below
the water level.
• To help prevent difficulty in priming, install the suction pipe without high
points, which can trap air.
• Check that the hydraulic co
OO
ections are correctly tightened and
that there are no leaks.
• The pipes must be supported to prevent any risk of breakage due
to the weight of the water.
A
Pump
B
Filter
C
Heating system
D
Water treatment system
Use as few elbow joints as possible. If there needs to be more than 10 elbow joints on
the hydraulic circuit, increase the pipe diameter.