baracuda titan 2 Eco 3, Инструкция по установке и эксплуатации, Страница: 11 / 18

11
BARACUDA | TITAN 2 ECO 3 | Installation & Operating Instructions
USE
11
BARACUDA | TITAN 2 ECO 3 | Installation & Operating Instructions
USE
1. Operating principle
• The filtration pump forms the core of the pool and is essential as it is used to
circulate water through the pool’s different components, in particular the filter.
Its motor drives the turbine in rotation, which drives the water.
The large strainer of the pre-filter collects major debris to prevent the filter
from becoming clogged too quickly or from becoming damaged.
2. User interface presentation
BUTTON DESIGNATION
ECO
KEY “ECO” speed activation
LED Flashing: in priming mode (approx. 2 minutes on start-up)
MED
KEY “MED” speed activation
LED Flashing: in priming mode (approx. 2 minutes on start-up}
HIGH
KEY “HIGH” speed activation
LED Flashing: in priming mode (approx. 2 minutes on start-up}
STOP KEY Shutdown of the speed during operation
POWER LED Flashing: pump stopped, powered up
ERROR LED The number of flashes indicates the error in progress “ECO” speed activation
3. Operation
• To prevent against any risk of explosion that may cause material
damage, serious injury or even death, make sure that the hydraulic
circuit is free of any debris or blockage and is not subject to
excessive pressure.
• Never run the pump “dry” as this may damage it.
• The pre- filter strainer cover must be closed by hand {do not use
any tools).