Baracuda
®
Adventura™ Robotic Pool Cleaner | Owner's Manual
2
Figure 19. Release Filter Canister Handle
8.
Empty all debris from the filter canister,
then rinse the canister, the filter support,
and the cleaner under water or using a
hose (Figure 20).
Figure 20. Rinse the Filter Canister
9.
Let the lid and filter canister dry.
10. Replace lid on the canister and then
replace canister back into the cleaner
body.
11. Plug the floating cable back into the
Control box and store the cleaner out of
direct sunlight for next use.
4.7 Storing the Cleaner
The cleaner must be cleaned regularly using
slightly soapy clean water. Do not use solvents
such as acetone or its equivalent. Rinse the
cleaner generously using clean water. Do not let
your cleaner dry in direct sunlight near the pool.
The cleaner must be stored on its caddy so that
it dries quickly.
1.
Starting at the cleaner head. Remove all
coils and tangles from the cable
(see Figure 21).
Figure 21. Untangle the Floating cable
2.
Place the cleaner in vertical position on
the caddy base with the rear tracks on
the caddy side wedges (see Figure 22).
Figure 22. Cleaner Stored Correctly on Caddy
3.
Loosely coil the power cable starting
at the cleaner and moving toward the
connection point at control unit. Store
the cable by wrapping it around the hook
located on the front of the caddy.
WARNING
To avoid electric shock and other hazards
which could result in permanent injury or death,
disconnect (unplug) the cleaner from the power
source before performing any cleaning and
maintenance.
10
Содержание Captura EM14 Series
Страница 1: ...H0738500_REVB TYPE EM14 TYPE EM15...