BANTE320 PORTABLE PH/ION METER
3
INDEX:
No.
CONNECTOR
FUNCTION
1
BNC Connector
For connecting the pH, ORP or Ion Selective Electrodes
2
Phone Jack
For connecting the temperature probe
Inserting the Batteries
Before using the meter, insert three 1.5V “AA” alkaline batteries into battery compartment, follow the procedure outlined below.
1. Remove the battery cover from meter’s backside.
2. Insert the batteries into the battery compartment, note polarity.
3. Replace the battery cover into its original position. Installation is completed.
When batteries are depleted, the meter allows you to use the USB cable connected to computer as a temporarily power supply.
Connecting the Electrode
Take out the pH, ORP or Ion Selective Electrode from the carrying case. Insert BNC connector into corresponding connector socket. Rotate
and push the connector clockwise until it locks. After connection is completed, DO NOT pull on the sensor cord. Always make sure that the
connector is clean and dry.
