BANTE320 PORTABLE PH/ION METER
20
RELATIVE MILLIVOLT MODE:
Press MODE key until the display shows
indicator, the meter enters relative mV measurement mode.
Select one of the above modes. Dip the ORP electrode into sample solution. Stir the sensor gently. Wait for the reading to stabilize, record
the measured value on the display.
Ion Concentration Measurement
1. Press MODE key until the meter shows
indicator.
2. Rinse the Ion Selective Electrode thoroughly with distilled or de-ionised water.
3. Dip the electrode into the sample solution, stir the sensor gently.
4. Wait for the reading to stabilize, record the measured value on the display.
Hold Function
Bante320 portable meter contains two data hold modes. When the Auto-Hold function is enabled, the meter will automatically sense a
stable endpoint measured value and freeze it, “HOLD” indicator appears on the display. If the Auto-Hold function is disabled, press key,
the meter will immediately freeze currently displayed value. Press the key again to release the measured reading, you can continue to take
measurement.
