BANTE320 PORTABLE PH/ION METER
7
Setting the Default Parameters
1. If necessary, press MODE key until the display shows corresponding mode indicator (e.g. pH mode).
2. Press and hold the key for 3 seconds, the meter enters setup menu, the display shows selectable parameter and page number.
3. Press
or
key to scroll through menu, select the parameter you want to set (Refer to Setup Menu section).
4. Press ENTER key to confirm, the display shows an option in the submenu.
5. Press
or
key to select an option.
6. Press ENTER key to confirm, the meter returns to measurement mode. Setting is completed.
You can easily set each default parameter as per the above method.
Enter
………Parameter
………Page number
………Option
………Parameter
