Bante904P Portable Conductivity/DO Meter
4
Installing the Batteries
•
Remove the battery cover from backside of the meter.
•
Insert three AA batteries into the battery compartment, note polarity.
•
Replace the battery cover into its original position. Installation is completed.
When the batteries are depleted, the meter allows using the DC5V power adapter with USB cable for power supply. NOTE, take out the batteries.
Connecting the Sensors
Take out the electrode from the carrying case.
•
Conductivity Electrode or Dissolved Oxygen Probe: insert the connector into the 6-pin connector socket, ensure the connector is fully seated.
•
Temperature Probe: insert the connector into to the corresponding connector socket.
After the connection is completed, DO NOT pull on the cable. Always make sure that connector is clean and dry.
