© Banner Engineering Corp. www.bannerengineering.com
6
Q
UICK
S
TART
G
UIDE
3. Quick Start Guide
3.1. Apply Power to the Controller
Follow these instructions to apply 12–30 V DC power to the DXMR110-8K using a wall plug.
P
REREQUISITE
:
Required equipment:
•
DXMR110-8K IO-Link Master
•
PSW-24-1
Wall plug power supply; 24 V DC, 1 A (or equivalent 24 V DC M12 power supply)
1.
Connect the
PSW-24-1
power supply to the male M12 connector on the DXMR110-8K, Port 0.
2.
Plug in the
PSW-24-1
wall plug power supply.
3.1.1. Wiring for the DXMR110-8K
Figure 1:
DXMR110-8K IO-Link Master ports
Table 1:
Ports 1-8 female connector
Port 1–8 5-pin M12 Connector (female)
Pin
Wire Color
Description
1
Brown (bn)
18 V DC to 30 V DC
2
White (wh)
I/Q (digital in-out)
3
Blue (bu)
DC common (GND)
4
Black (bk)
C/Q (communications/digital in-out)
5
Gray (gy)
Not used/reserved
Table 2:
4-pin M12 male connector
4-pin M12 Power Connector (male)
Pin
Wire Color
Description
1
Brown (bn)
18 V DC to 30 V DC
2
White (wh)
18 V DC to 30 V DC
3
Blue (bu)
DC common (GND)
4
Black (bk)
DC common (GND)
4
1
3
2
8
5
7
6
DXMR110-8K
1
2
P
o
P
i
Device LEDs (x16)
M12 Power Port
(Male)
D-Coded Ethernet
(Female)
D-Coded Ethernet
(Female)
IO-Link Master Ports 1-4
(Female)
IO-Link Master Ports 5-8
(Female)
M12 Power Port
(Female)
2
3
4
1
5
1
4
3
2
