manualshive.com logo in svg

Banner DXM100, Инструкция по эксплуатации, Страница: 28 / 52

Поделиться
Скачать
Banner DXM100 Скачать руководство пользователя страница 28

5. Enter the starting time, date, and starting value for the local register.
6. Enter the ending time, date, and ending value for the local register.

5.3 Create Holiday Schedules

Use the Create Holidays tab to create exception conditions that alter the standard scheduled register changes.

To create a holiday:

1. Click on the Add New Rule link.
2. Name your new holiday by clicking on the name link and entering a name.
3. Select the start date and time for the new holiday.
4. Select the stop date and time for the new holiday.

5.3 Power Cycling During Schedules

If power is cycled to the DXM Controller in the middle of a schedule, the DXM Controller will look at all events scheduled

that day and process the last event before the current time.

5.4 LCD and Menu System

Banner Eng

.                 

08:25:45

→

Registers

→

Push

S

→

08:25:15 

→

ISM Radio

→

System

↑

↓

ENTER

BACK

→

System Info

The LCD has four user-defined LED indicators, four control buttons, and an

LCD display. The four buttons control the menu system on the LCD menu.

The top-level menu always displays the time in a 24-hour format.

•

The up and down arrows scroll through display items.

•

The enter button selects the highlighted items on the display

•

The back button returns to a previous menu option.

Main Menu

Sub Menu

Description

Registers

08:25:45

Banner Eng.        

12345   Name of Reg1

12345   Name of Reg2

12345   Name of Reg3

12345   Name of Reg4

12345   Name of Reg5

12345   Name of Reg6

↑

↓

ENTER

BACK

The Registers menu displays the user-defined registers and associated

values. The user-defined registers are set up using the DXM Configuration

Tool.

Push

Banner Eng.        

08:25:45

→

 

Trigger  Push

Status:  ??
Time:  ??

↑

↓

ENTER

BACK

The Push menu displays information about the last data sent to the Web

server.

•

The Trigger Push submenu forces an immediate push to the web

server.

•

The status and time fields indicate success or failure of the last

attempted push and time of the last attempted push.

DXM100 Controller Instruction Manual

 

 

28

www.bannerengineering.com - Tel: 763.544.3164

 

Содержание DXM100





















































Отзывы:

Нет отзывов