Banner DXM100 Скачать руководство пользователя страница 17

Страница: 17 / 52

The Modbus Slave port settings include:

•

Baud rate and parity (also set on this screen)

•

Set the Modbus Slave port ID using the DXM Controller LCD

•

Set the Wireless Modbus Backbone parameter when there is an ISM radio plugged into the SAM4 processor

board and the Modbus slave port is using the MultiHop radio as the slave port instead of the terminal block

connection.

3.5.2 Modbus Slave Port ID

Set the DXM Modbus slave port using the LCD menu system. On the LCD,

use the down arrow to highlight System. Enter the System menu by

clicking Enter.

Banner Eng

08:25:45

→

Registers

→

Push

→

08:25:15

→

ISM Radio

→

System

↑

↓

ENTER

BACK

→

System Info

To change the DXM Slave ID, highlight DXM Slave ID, then click Enter.

System

08:25:45

→

DXM Slave ID: -1

→

Provision Cell

→

Power: [dc / solar]

→

Restart!

ENTER

BACK

↑

↓

Use the up and down arrow buttons to change the DXM Slave ID.

Press Enter to accept the ID change.

After you change the DXM Slave ID, use the DXM Configuration Tool to cycle power to the device. After cycling power to

the device, the updated DXM Slave ID is listed under the System menu.

3.6 USB

The USB port is used with the DXM Configuration Tool to program the DXM100 Controller. The USB port is also used as the

console output for the processor and ScriptBasic.

DXM100 Controller Instruction Manual

www.bannerengineering.com - Tel: 763.544.3164

Содержание DXM100





















































Результаты поиска

Содержание DXM100

Отзывы:

Banner DXM100, Инструкция по эксплуатации, Страница: 17 / 52

Результаты поиска

Содержание DXM100

Отзывы: