Bang & Olufsen BeoVision 7, Справочник

Страница: 40 / 64

>> Edit tuned TV channels
You can store TV channels on channel
numbers of their own. Fine tune the channel
reception, indicate the presence of coded
channels and choose appropriate sound types
for the individual channels.
> Press TV to switch on the television.
> Press Menu to bring up the TV SETUP menu
and press to highlight TUNING. (Beo: Use
).
> Press the centre button to bring up the TUNING
menu and press to highlight MANUAL
TUNING. (Beo: Press GO and ).
> Press the centre button to bring up the TV
MANUAL TUNING menu. (Beo: Press
GO
).
> Press or to move between items on the
menu. (Beo: Press or ).
> Press or to view your choices for each item.
(Beo: Press or ).
> If you choose NAME, then press the green
button to start the naming procedure. Use or
and to enter the characters in the name you
choose. (Beo: Use or and ).
> To bring up the extra TV MANUAL TUNING
menu, move to EXTRA and press the centre
button. (Beo: Press
GO
). Now fine tune if
relevant, or select type of sound.
> When you have finished editing, press the
centre
button to accept the settings. (Beo:
Press GO ).
> Press the centre button to store the adjusted
channel. (Beo: Press
GO
).
> Press BACK to exit all menus. (Beo: Press
EXIT ).
If the item SYSTEM appears on the menu, then
make sure that the correct broadcast system is
displayed before you begin tuning:
B/G … for PAL/SECAM BG
I …
for PAL I
L … for SECAM L
M … for NTSC M
D/K … for PAL/SECAM D/K
If channels are broadcasted with two languages
and you want both languages, you can store the
channel twice, once with each language.
What’s on the TV MANUAL TUNING menu …
SEARCH … Start search tuning.
FREQUENCY … Select a frequency to tune in.
CHANNEL NUMBER … Store or change channel
number. You can store channels.
NAME … Access the naming menu and name the
channel you have selected.
EXTRA … Access the extra TV MANUAL TUNING
menu.
Even though you store a type of sound/language,
you can switch between the various types while
watching a TV programme. For further
information, refer to the chapter ‘Surround sound
and Home cinema’ on page 12 in the Guide.
What’s on the extra TV MANUAL TUNING
menu …
FINE TUNE … Fine tune the frequency of a
channel or tuned channel. You can fine tune
within the range of - – +.
(DECODER) … A decoder is necessary for the
reception of coded channels. Usually the
decoder is detected automatically during tuning,
but it can be selected via this menu option. Set
DECODER to one of following options: ON (for
decoder on) or OFF (for no decoder).
(TV SYSTEM) … TV broadcast system – this option
is only available on certain types of TV sets, as
the TV broadcast system is usually selected
automatically.
SOUND (mono, stereo or language) … Several
types of sound may be available for different
channels, mono, stereo or different languages.
On the relevant channel or frequency select the
options MONO (FM / NICAM mono sound),
STEREO (NICAM / A2 stereo sound), MONO1
(mono language 1), MONO2 (mono language
2), MONO (mono language ), or STEREO2
(stereo language 2).
Adjust tuned channels
TV MANUAL TUNING
store
GO
SEARCH . . .
FREQUENCY 210
CHANNEL NUMBER 1
NAME DR1
EXTRA
0