Bang & Olufsen BeoVision 7, Справочник

Страница: 28 / 64

If your setup includes a motorised stand or
wall bracket, you will during first-time setup
be prompted to calibrate the outer positions
of the motorised movement. The motorised
movement of the television will not work
until the calibration process described below
has been completed.
The calibration process allows you to set the
maximum angle the television will turn – left
and right and tilt - up and down.
When the STAND ADJUSTMENT menu
appears …
> If your stand or wall bracket is of a type with
motorised turn and tilt, move to SET LEFTMOST
POSITION and press to turn the television
towards the left, until it has reached the
position you wish to restrict the movement to.
(Beo: Press ).
> Move to SET RIGHTMOST POSITION and press
to turn the television towards the right, until it
has reached the position you wish to restrict the
movement to. (Beo: Press ).
> Move to SET TOP POSITION and press the
green
button to tilt the television upwards,
until it has reached the position you wish to
restrict the movement to.
> Move to SET BOTTOM POSITION and press the
red button to tilt the television downwards,
until it has reached the position you wish to
restrict the movement to.
> Press the centre button to store. (Beo: Press
GO ).
The STAND POSITIONS menu appears, and you
can now make your preferred preset positions for
the television to turn to. Refer to page
‘Set
positions for the television to turn to’ .
Calibrate the motorised movement
>> First-time setup of your television
2