Bang & Olufsen BeoVision 7, Справочник

Страница: 13 / 64

Use equipment menus
Once you have activated connected
equipment, you can operate its own menus
with your remote control.
While equipment menus are shown …
> Press or to move the cursor up or down.
(Beo: Use or ).
> Press or to move the cursor left or right.
(Beo: Use or ).
> Press the centre button twice to select and
activate a function. (Beo: Press GO ).
> Press the
centre
button and then or to step
between menu pages or step in channel lists.
(Beo: Press
GO and or ).
> Press
STOP
to exit menus, or return to a
previous menu*.
> Press and use the number buttons to enter
information in menus or services when relevant.
(Beo: Use the number buttons).
> Press BACK to exit menus, enter or exit
different modes, such as radio. (Beo: Press
EXIT ).
> Use the coloured buttons as indicated in the
menus of your connected equipment.
*Depending on the source you have selected, you
may have to press BACK twice instead of STOP to
return to a previous menu. (Beo4: Press EXIT
twice instead of STOP).
Use the Beo4 remote control
If you have a Beo4 remote control, some
functions are available directly via Beo4
when you switch on the equipment.
Additional functions are available through a
Peripheral Unit Controller menu that you
bring up on the screen. In this menu you can
see which Beo4 buttons activate specific
services or functions.
> Press a source button, for example V MEM , to
switch on connected equipment.
> Press
MENU
to bring up the Peripheral Unit
Controller menu.
> Press the number button that activates the
function you want, or press one of the coloured
buttons to activate a function.
The Peripheral Unit Controller menu cannot be
displayed on the television screen in the link room.
Press GO and then the number button that
activates the function you want or press a
coloured button to activate a function.
When you have selected connected equipment as
a source, press MENU twice to bring up the
television main menu.
Direct Beo4 operation
If you know which Beo4 button activates the
function you want, you can activate the
function without bringing up the Peripheral
Unit Controller menu first.
While your equipment is on …
> Press one of the coloured buttons to activate a
function.
> Press GO and then or to step up or down
through, for example, set-top box channels.
> Press and hold
GO
to bring up the Program
guide or the ‘Now/Next’ banner on the screen if
you are using a set-top box that supports these
functions.
1