Bang & Olufsen BeoVision 7, Справочник

Страница: 19 / 64

Audio system
If you have a Bang & Olufsen audio system with a
Master Link socket, you can connect it to your tele-
vision. Use a Master Link cable, and connect it to
the Master Link socket on the main connection
panel. Refer to
‘Connect your audio system to the
television’ on page 0 in the Reference book.
Home cinema setup with projector and a
home automation system
The television also supports the use of a projector.
You can also connect a home automation system
to the television, and thereby control room lights
and curtains.
If the built-in receiver for the remote control signals
(IR-receiver) is hidden behind the lowered projection
screen, you must set up an external IR receiver, as
well. The IR-receiver is available as an optional
accessory from your Bang & Olufsen retailer.
Mains supply connection
Connect the television to the wall outlet. Use the
~ socket on the main connection panel. A tiny, red
light appears in the IR-receiver. The television is in
standby mode and ready to be used*.
The television can only be switched off completely
by disconnecting it from the wall socket.
The supplied mains cord and plug are specially
designed for the television. If you change the plug
or in any way damage the mains cord, it will affect
the TV picture quality!
PR
O
JE
C
TO
R
O
U
T
PU
C
1
+
2
IR
-I
N
CINEMA CONTROL
Home
Automation
system
ML
1
*Note! It takes the television 20 seconds to start
up and become ready for use.