Bang & Olufsen BeoVision 6, Руководство пользователя

Страница: 42 / 78

42
Set up your television
For information about how to fasten
and run the cables on the rear of the
television, refer to the opposite page.
For further information about the
socket panels, refer to pages 45–46.
Handling your television
The television is not designed to stand on its
own, it must be supported until mounted on
the chosen stand.
– Avoid placing you television in direct sunlight or
direct artificial light, such as a spotlight, as this
may reduce the sensitivity of the remote control
receiver. Also if the screen is overheated, black
spots may appear in the picture. These spots
disappear again, once the television cools down
to normal temperature.
– Make sure that the television is set up, placed
and connected in accordance with this Guide.
– The television is developed for indoor use in dry,
domestic environments only. Use within a
temperature range of 10–40°C (50–105°F).
– Do not place any items on top of the television.
– Always place your television on a firm and stable
surface.
– Do not attempt to open the television. Leave
such operations to qualified service personnel.
Overview of socket panels
1 Cover for stand and wall bracket fastening
bracket. Pull out at the bottom to remove the
cover.
2 Main socket panel, refer to page 45 for further
information.
3 Cover for main socket panel. Pull out at the top
and lift to remove.
4 Cover for camcorder and headphones sockets.
Push in to open, push again to close.
5 Clamp for cables. It is important that the cables
are lead through the clamp and tied with a
cable tier as the cables can otherwise be tugged
free of the sockets. Refer to page 44A for
further information.
1
1
2
3
3
4
5
If you have a motorised stand, leave enough space
around the television to allow it to turn freely. The
television can also be turned by hand.
The cover for the stand and wall bracket fastening
bracket can be kept inside the cover for the main
socket panel – when the connector is in use.