Bang & Olufsen BeoVision 6, Руководство пользователя

Страница: 29 / 78

29
Determine the centre position
If your television is equipped with the optional
motorised stand, the STAND ADJUSTMENT
menu appears on the screen. Once the centre
position is determined, select your favourite
positions for when the television is switched on
and in standby.
Store all programs and settings
When you have selected the menu language,
a menu for program tuning automatically
appears on the screen.
TV
AUTO TUNE
start
CHECK AERIAL CONNECTION
When the menu for auto tuning appears, the
prompt CHECK AERIAL CONNECTION appears to
remind you to check that your TV aerial is properly
connected.
> Press
tt
to start auto tuning. The television tunes
in all available programs.
STAND ADJUSTMENT
CENTRE POSITION
adjust
GO
ADJUSTING . . .
When the STAND ADJUSTMENT menu
appears…
Make sure that there is enough room for the
television to turn to the right and left.
> Press GO to start stand adjustment.
> If the adjustment is interrupted the text
‘ADJUSTMENT FAILED’ appears on the screen.
Remove obstacles preventing the television from
turning, and press GO to start adjustment again.
> Once adjustment is complete, the text
‘ADJUSTMENT OK’ appears, followed by the
STAND POSITIONS menu.
> To store a stand position for when the television
is switched on, press
ss
or
tt
to turn the
television and place it according to your viewing
position.
> To store a stand position for when the television
is switched to standby, press
▼
to move to
TV STANDBY.
> Press
ss
or
tt
to turn the television and place it
as you wish.
> Press GO to store your positions.
NOTE! For further information about stand
positions, refer to the chapter ‘Set positions for
the television to turn to’ on page 36.