Bang & Olufsen BeoVision 6, Руководство пользователя

Страница: 56 / 78

4
Connect a set-top box
Connect a set-top box* to the
V.TAPE or AV sockets on the
television.
If you have connected a BeoCord
V 8000 to your television, you must
connect your set-top box to the
DECODER socket on the BeoCord
V 8000.
Make sure that all connected
equipment is registered in the
CONNECTIONS menu.
Once the registration has been
made, you are requested to select
your specific set-top box in the
SET-TOP BOX menu. For further
information, refer to the chapter
Register additional video equipment .
*Note: Set-top boxes must be set up in
accordance with the documentation enclosed
with them.
BeoVision 6 Set-top box
AV connection
IR transmitter connection
Disconnect all involved systems from the
mains before you connect external
equipment. Use the 21-pin AV cable to
connect the set-top box to your television:
> Connect one end to the set-top box.
> Run the cable to the AV or V.TAPE socket on
the back of the television.
> Connect the IR transmitter to the IR OUTPUT
socket on the television.
> Fasten the IR transmitter to the IR receiver of
the set-top box. Follow the instructions
enclosed with the IR transmitter.
To be able to use the remote control included with
your set-top box, do not cover its IR receiver
entirely.