Bang & Olufsen BeoVision 5, Руководство пользователя

Страница: 37 / 127

Text registers
Selecting “Set” makes it possible to choose from 7 different teletext character set.
0 1 2 3 4 5 6
English Polish English English English English English
German German German Russian German Arabic Hebrew
Swedish Swedish Swedish Estonian Swedish French Arabic
Italian Italian Italian Czech/Slovak Italian
French French French German French
Portuguese Serbocroat Portuguese Lithuanian/Lettish Portuguese
Czech/Slovak Czech/Slovak Turkish Ukranian Turkish
Rumanian Greek
Group delay errors in certain cable aerial systems can disturb the reception of
teletext. This is prevented by connecting a fi lter in series with the CVBS signal
applied to the teletext decoder.
The numbers below the Register numbers R01 - R10 are programme numbers. If
all the numbers are 0, no fi lter has been connected on any programme number.
If you wish to connect a fi lter on a programme number, select a register by
pressing
l
/
n
, then press the desired programme number, and fi nally press GO .
In the example above a fi lter has been connected on programmes 5 and 11. The
fi lter is not engaged until the next time you switch to the programme in question.
WSS setting
Some TV broadcasters transmit a picture format identifi cation, enabling the TV to
switch to the proper format automatically when WSS is On. When WSS is On,
detection is carried out on all picture sources, i.e.
TV tuner, satellite tuner, and video/DVD playback.
Under certain conditions, e.g. a poor signal-to-noise ratio, the detection may fail,
causing faulty format switching. WSS may therefore be set to “Off”.
WSS may also be set to “Broadcast only”, which means that detection is carried
out only on signals from the TV tuner and the satellite tuner.
Some broadcasters do not send a “WSS Off” signal when a programme is fi nished
and another begins. When the “WSS signal” disappears, the format will return to
default.
Theft protection setting
- In this menu it is possible to activate (ON) or deactivate (OFF) theft protection. It is
only possible to access this menu if no pin code is set for BeoVision 5.
Text Register setup
R01 R02 R03 R04 R05 R06 R07 R08
5 11 0 0 0 0 0 0
R09 R10 Set
0 0 0
WSS setting
WSS
On
Service Mode, English 5.7