Settings 39
Sound
Speaker setup
During first time setup only one or one pair of speakers are connected to.
When more speakers are used with BeoSound Moment they must be setup manually using the following instructions.
Wired and wireless speakers set up with BeoSound Moment can be played simultaneously.
Set up wireless speakers
Note: some wireless speakers have a
Reset
button that may be activated if the speaker has been used in another setup or has been scanned by
another wireless transmitter.
When wireless speaker(s) are set up in the first time setup, the speaker(s) are listed with type, and channel.
If no speakers are set up with the BeoSound Moment and it is desired to connect such, do the following:
- Press
Rescan
and all wireless speakers found will be listed with type.
- For each speaker, press
Locate
and press the appropriate channel. Note that subwoofer speakers will have
subwoofer
as channel.
The speakers will then be connected.
Set up wired speakers
Read instruction.
All wired speakers connected are identified as a speaker, and for each of these the following must be done:
- The speaker is either identified as the ‘<
correct type>
’ or as
Other
- in the type field press and scroll up/down in the list to find the correct type
- For each speaker, press
Locate
and press the appropriate channel.
Repeat the above for each speaker.
The speakers will then be connected.
Subwoofer
When a subwoofer is connected either wired using Power Link cable or wirelessly, the subwoofer is identified and the bass management function
is automatically activated.
If other speakers (L and R) are connected using Power Link cable only one speaker is connected to a PL socket of the BeoSound Moment hub
(SoundHeart), and the two speakers are daisy chained by Power Link cable.
Содержание BeoSound Moment
Страница 69: ...69...
