Bang & Olufsen BeoSound Moment, Руководство по установке

Страница: 35 / 70

Settings 35
Legal
Credits
Credits are given to contributors to the product and the experience by the product.
Open source licensing
Legal open source licensing information and conditions are given here.
Gracenote EULA
Legal licensing information and conditions are given here regarding Gracenote EULA.
General Information
Here you can find additional information about then concept and use of:
MoodWheel
, and
PatternPlay .
Additional information is found on www.bang-olufsen.com . (It is advisable to add to this
/en/customer-service
for English and similar for other
languages.
Software update
System software update
The version numbers for the two builds running in the BeoSound Moment.
Automatic software update
Is per default (factory reset) set to On and can be set to Off (not recommendable).
A check for new updates are made every night (local time) somewhere between T00:00 and T06:00 and takes only place if automatic update is set
to On, and it BeoSound Moment is in standby mode.
In the following setups, it may be relevant to set automatic update to Off: - Hotels; - Retailers; - Home Automation setup; and - test environments,
as if an update takes place either in BeoSound Moment or in another network link product all other network link products will then ask if they
should also be updated. This may be unlikely in certain situations. If automatic SW update is set to Off, then check for updates regularly, when
ready to take updates.
Pressing the button
Check for updates
will, when connected to the internet and BeoPortal, search for newer updates than the one actually running.
Read instruction on the display for further details.
Alternatively the SW can be installed using the ServiceTool (see
page 57 ) and a USB memory stick (see page 58) .