Bang & Olufsen BeoSound Moment, Руководство по установке

Страница: 20 / 70

First time setup 20
Speakers
The user can choose between wireless speakers, wired speakers or TV speakers during First time setup. Additional speaker set up can be done at
any time after First time setup. One speaker type must be selected and for wired speakers at least one speaker must be connected. The user can
go forth and back between the speaker types until a
Yes
button is pressed. For each of the speaker types an appropriate question is presented:
- Do you want to add wireless speakers? and choose by a tab on
Yes
or
No
.
- Do you want to add wired speakers? and choose by a tab on
Yes
or
No
.
- Do you want to use the TV speakers? and choose by a tab on
Yes
or
No
.
If no speakers are found, a message is displayed that no speakers are found and another try is made possible. Going to previous page even makes
it possible to connect wireless speakers.
When a
Yes
button related to either of the speaker types is pressed and a speaker is found connected, a page is displayed as follows:
- Setting up speaker channels left and right.
Note: Subwoofers must be set up manually afterwards see
page 39 .
Noise will be emitted from one of the speakers found.
Tap on the appropriate speaker symbol (left/right) matching
the speaker emitting noise.
In case of only two speakers the other speaker will be the
speaker for the other channel.
In case of more speakers and subwoofer(s) these must be
set up later; see page 39.
In case the TV speakers are selected the BeoSound
Moment, the TV must be waked up and connection is
established.
Setting up speaker channels left and right
Place yourself in your favorite listening position.
When sound is heard in one of the speakers, tab the speaker icon corresponding to the
speaker the sound comes from (to your right or your left).