C U S T O M I S I N G Y O U R B E O 4
10
Set up and extend your Beo4
The Beo4 remote control is set up to match
your Bang & Olufsen systems. In most cases,
the relevant extra Beo4 “buttons” shown in
the display are already available, however, you
can still customise your Beo4 to suit your
specific demands or products.
You can set the Beo4 up so that only the extra
“buttons” that
you
feel are relevant are
included. You may remove any "button" or
add a "button" yourself, if necessary. You can
also rearrange the order in which the extra
“buttons” appear when you press LIST.
To add, move or remove extra "buttons", you
must access the Beo4 setup function, and find
ADD
? (for adding a “button”),
MOVE
? (for
rearranging the order of “buttons”), or
REMOVE
? (for removing a “button”).
*Please note…
If you wish to find out what the various extra
Beo4 “buttons” or setup functions imply, then
turn to the Beo4 Lexicon at the back of this
guide for further information and
explanation.
LIST
The Beo4 setup function consists of a number
of different functions. The first three
“buttons” or functions refer to how you
customise Beo4, adding, moving or removing
individual extra “buttons” used in your daily
operation. The remaining setup functions
relate to the products your Beo4 operates*.
