![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beo4/beo4_reference-manual_3719240007.webp)
9
When calling up extra “buttons”…
You can either hold the LIST button down to
make the “buttons” appear successively in the
display; or press LIST repeatedly to step
through them one by one.
When you have found the “button” you want,
you must either press the GO button to switch
on (activate) the function, or start operating
the function directly using the Beo4 buttons.
When you have finished operating the extra
function, then press EXIT or a source button
e.g. TV to remove the “button” from the Beo4
display, and return to controlling the original
source e.g. TV.
Note: An extra “button” in the Beo4 display,
however, only gives access to operating a
function, if that function is offered by your
particular Bang & Olufsen product.,
Using the Beo4 LIST button in combination with
the display…
Press LIST repeatedly or continuously
until the “button” you want is
displayed
When you have found the “button”
you want…
Press GO to access the function or
switch on the extra source
Or…
Press the relevant buttons to start
operating the function, for example,
ss tt
or
▲ ▼
…
Press EXIT to return to your original
source
Press a source button e.g. TV to
return to controlling TV
Please note…
Not all Bang & Olufsen products (for
example not all TVs) offer the same set of
functions. That is why the Beo4 is specially
set up to match your particular Bang &
Olufsen system(s).
LIST
GO
then
or
EXIT
TV