B&R X20cSC2212, Руководство пользователя, Страница: 52 / 54

X20(c)SC2212
52 Data sheet V1.141 X20(c)SC2212 Translation of the original documentation
20 Version history
Version Date Comment
1.141 April 2019
•
Chapter 4 "Technical data" : Updated standards.
•
Updated chapter 18.3 "Security concept" .
•
Updated chapter 18.6 "Installation notes for X20 modules" .
1.140 February 2019
•
Chapter 4 "Technical data" : Limited installation elevation to 2000 m.
•
Chapter 16.1 "Parameters in the I/O configuration" : Added parameter "Blackout mode".
•
Chapter 16.3 "Parameters in SafeDESIGNER - Release 1.10 and later" : Added filter value to danger notice.
• Chapter 17.2 "Data transmission time on the bus" : Updated calculation of maximum data transmission time.
• Chapter 18 "Intended use" : Added danger notice.
• Added chapter "Security notes".
• Chapter 18.5 "X20 system characteristics" : Added warning notice.
• Updated standards.
• Editorial changes.
1.120 November 2017 • Chapter 4 "Technical data" :
– Updated standards and safety characteristics.
– Added input characteristics per EN 61131-2.
– Updated input current and input resistance.
– Added line length between pulse output and input.
– Updated braking voltage when switching off inductive loads.
– Updated peak short-circuit current.
– Added max. switching frequency.
– Coated module: Extended temperature range.
– Added information.
– Updated derating.
• Chapter 7 "Connection examples" : Added information.
• Chapter 15 "Restart behavior" : Updated description.
• Chapter 16.3 "Parameters in SafeDESIGNER - Release 1.10 and later" : Group "Safety Response Time": Re-
moved parameter "Synchronous Network Only" and updated parameter "Safe Data Duration".
•
Chapter 16.4 "Channel list" : Added new channels and information.
•
Chapter 17.2 "Data transmission time on the bus" : Updated description and added information.
•
Chapter 18.6 "Installation notes for X20 modules" : Updated danger notice.
•
Chapter 18.7 "Safe state" : Updated danger notice.
•
Updated standards.
•
Editorial changes.
1.101 March 2016 • Chapter 12 "I/O update time" : Updated.
• Chapter 17 "Safety response time" : Added information.
1.100 January 2016 Merged coated/uncoated modules.
• Chapter 1 "General information" : Added.
• Chapter 4 "Technical data" :
– Updated standards.
– Limited output protection to max. 30 minutes.
– Updated temperature range.
– Updated technical data.
• Chapter 8.2.6 "Safety actuator connection" : Added new modules.
• Revised chapter 12 "I/O update time" .
• Chapter 16.3 "Parameters in SafeDESIGNER - Release 1.10 and later" : Added.
• Chapter 16.4 "Channel list" : Updated figure "Restart interlock state diagram".
• Chapter 17.1 "Signal processing on the safe B&R input module" : Updated description.
• Chapter 17.2 "Data transmission time on the bus" : Updated description with "Release 1.10 and later".
• Chapter 17.3 "Signal processing on the safe B&R output module" : Updated description.
• Chapter 17.4 "Minimum signal lengths" : Updated description.
• Revised chapter 18.4 "Safety technology disclaimer" .
• Chapter 19 "Release information" : Updated.
1.91 April 2015 • Chapter 4 "Technical data" : "Safe digital inputs": "Cable length": Limited to 50 m.
• Chapter 8.2.4 "Connecting multi-channel sensors with contacts" : Updated danger notice.
• Corrected chapter 13 "Filter" .
• Chapter 17.1 "Signal processing on the safe B&R input module" : Updated description.
1.90 October 2014 • Chapter 4 "Technical data" : "Temperature": "Operation": "Horizontal mounting orientation": Extended temperature
range to 60°C.
• Updated chapter 19 "Release information" .
• Editorial changes.
Table 28: Version history