Commissioning
Mobile Panel 40/50 User's manual V1.80
67
All
safety
functions have a dual-circuit design so that up to
safety
category 3 PL d
can
be achieved per
EN
ISO
13849-1:2008
It is the
machine
manufacturer's responsibility to select a handheld terminal suitable for the
machine
and to con-
figure any additional add-on options in accordance with the legally required danger and risk assessment.
The information in chapter
"European Union directives" on page 91
regarding the intended use of the handheld
terminal must also be observed.
3.2 Operating the Mobile Panel
Caution!
•
When routing or laying cables, make sure that there is no danger of tripping that could cause
the Mobile Panel
device
to fall to the
ground
.
•
The Mobile Panel attachment cable is not permitted to be crushed or run over sharp edges that
which
can
damage or chafe the cable jacket.
•
Operating a Mobile Panel with a damaged attachment or
control
cabinet cable is not permitted.
•
When the Mobile Panel is not in use, it should be safely stowed away on the intended wall
mount. If the Mobile Panel
device
is stored on a wall mount in the machine's danger zone, stop
button functionality must be ensured, i.e. the attachment cable must be connected.
•
If temporarily putting down the Mobile Panel
device
, do not place it face down in a way that
could damage the
control
devices or inadvertently trigger actions.
•
The
touch screen
is not permitted to be operated with sharp
object
s such as ballpoint pens,
knives, screwdrivers, etc. These
object
s will cause irreparable damage to the
touch screen
. The
ideal
object
for operating the
touch screen
is the integrated
touch screen
stylus pen (
"Touch screen stylus pen" on page 18
). The
touch screen
can
also be operated with a finger.
•
Only one point on the
touch screen
is permitted to be touched at a time. Touching several places
simultaneously
can
trigger unintended actions.
•
Placing
object
s on top of the
touch screen
is not permitted.
•
Never lay the
device
down on unstable surfaces or shelves. It could fall and become damaged.
•
Never expose the
device
to heat sources or direct sunlight.
•
Ensure that no foreign bodies or liquids penetrate the interior of the
device
.
•
Pressing several function or system keys simultaneously
can
trigger unintended actions in
some circumstances.
Information:
•
All protective coverings, housing screws, cable grommets and the
device
housing must be
checked periodically for damage.
•
For instructions on how to clean the Mobile Panel
device
,
.