B&R MAPPC700A-ENG, Руководство пользователя

Страница: 78 / 524

78
Technical data • Entire device
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
2.4.6 Supply voltage
The PPC700 system units have a 24 VDC ATX compatible power supply.
The 3-pin socket required for the supply voltage connection is not included in delivery. This can
be ordered from B&R using the model number 0TB103.9 (screw clamp) or 0TB103.91 (cage
clamp).
The pin assignments can be found either in the following table or printed on the Panel PC 700
housing. The supply voltage is internally protected (10A, fast-acting), so that the device cannot
be damaged if there is an overload (fuse replacement necessary) or if the voltage supply is
connected incorrectly (reverse polarity protection - fuse replacement not necessary).
Ground
PPC700 systems are equipped with a ground connection. The M4 self-locking nut must be used,
for example, to fasten a copper strip that is built into the PPC700 at a central grounding point in
the control cabinet or system. The largest possible conductor cross section should be used (at
least 2.5 mm²).
System unit Max. performance
at + 5 V
Max. performance
at + 3V3
Max. power at
+ 12 V
Max. power at
- 12 V
Max.
total power
All types 55 W 23 W 12 W 1.2 W 110 W
Table 36: Power supply
Supply voltage
Protected against reverse polarity
3-pin, male
Pin Description
1 +
2 Functional ground
3 -
Accessories
0TB103.9 Plug 24 V 5.08 3p screw clamps
0TB103.91 Plug 24 V 5.08 3p cage clamps
Figure 29: Supply voltage connection
Warning!
Functional ground (pin 2 of power supply and ground connection) must be kept as
short as possible and connected to the largest possible wire cross section at the
central grounding point (e.g. the control cabinet or system).
Power 24 VDC
+
-
1 2 3