B&R MAPPC700A-ENG, Руководство пользователя

Страница: 314 / 524

314
Software • Upgrade information
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
2.1.2 Upgrade BIOS for X945
• Download ZIP file from the B&R homepage ( www.br-automation.com )
• Create bootable media.
• Copy the contents of the *.zip file to the bootable media. If the B&R upgrade was already
added when the bootable media was created using the B&R Embedded OS Installer, then
this step is not necessary.
• Connect the bootable media to the PPC700 and reboot the device.
• The following boot menu will be shown after startup:
1. Upgrade AMI BIOS for X945/N270 (5PC600.X945-xx)
2. Exit to MS-DOS
Concerning item 1:
BIOS is automatically upgraded (default after 5 seconds).
Concerning item 2:
Returns to the shell (MS-DOS).
• The system must be rebooted after a successful upgrade.
Information:
In MS-DOS, Win95 and Win98, a blank HD disk can be made bootable using the
command line command "sys a:" or "format a: /s".
Information concerning creating a bootable diskette in Windows XP can be found on
page 321.
Information concerning creating a USB flash drive for a B&R upgrade can be found
on page 323.
Information concerning creating a CompactFlash card for a B&R upgrade can be
found on page 325.
Information:
After the system restart, the warning "CMOS checksum BAD" is displayed, but BIOS
boots through it. The setup can be opened using the "Del" key and the setup
defaults must be loaded again and saved using either the "F9" key or the menu item
"Exit" - "Load CMOS defaults".