B&R MAPPC700A-ENG, Руководство пользователя

Страница: 285 / 524

Software • BIOS options
Ch
apte
r 4
Soft
w
are
285 Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
1.5 Boot
Interrupt Selection of the interrupt for the COM port. IRQ 5, IRQ 6, IRQ 7,
IRQ 10, IRQ 11
Selected interrupt is assigned.
CAN Configuration of the CAN port of the B&R
add-on CAN interface card
5AC600.CANI-00 (IF option). Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
CAN port. None -
Interrupt Selection of the interrupt for the CAN port. IRQ 10, NMI Selected interrupt is assigned.
ETH2 LAN controller For turning the onboard LAN controller
(ETH2) on and off. Disabled Disables the controller.
Enabled Enables the controller.
ETH2 MAC Address Displays the Ethernet 2 controller MAC
address. None -
Figure 165: X945 Boot Menu
BIOS setting Meaning Setting options Effect
Table 123: X945 Legacy Devices setting options (Forts.)
Main Advanced Security Power Exit Boot
Boot Priority Selection [Type Based]
Boot Device Priority
Boot Settings Configuration
The device based boot
priority list allows
to select from a list
of currently detected
1st Boot Device [Primary Master] devices.
2nd
Select Screen
Select Item
+- Change Option
Quick Boot [Enabled] F1 General Help
Quiet Boot [Disabled] F10 Save and Exit
Automatic Boot List Retry [Disabled] ESC Exit
AddOn ROM Display Mode [Keep Current]
Halt On Error [Disabled]
Hit ´DEL´ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
PXE Boot to LAN (ETH1) [Disabled]
Power Loss Control [Turn On]
Boot Device [Primary Slave] The type based boot
3rd Boot Device [USB Floppy] priority list allows
4th Boot Device [USB Removable Devi] to select device types
5th Boot Device [USB Harddisk] even if a respective
6th Boot Device [USB CDROM] device is not (yet)
7th Boot Device [Disabled] present.
8th Boot Device [Disabled]
BIOS SETUP UTILITY
v02.66 (C)Copyright 1985-2009, American Megatrends, Inc.