B&R Automation PC 620, Руководство пользователя

Страница: 119 / 594

Technical data • Entire device
Secti
on 2
Te
chn
ica
l da
ta
119 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.13.16 Monitor / Panel connection
When using this video output, understand that the video signals that are available (RGB, DVI,
and SDL - Smart Display Link) will vary depending on the system unit and CPU board.
Hotplug for a display device is not supported in any combination. The plugs are specified for 100
connection cycles.
See "Definitions for RGB, DVI, SDL", on page 123 for descriptions of RGB, DVI and SDL.
Monitor / Panel
The following will provide an overview of the video signals
available with different system units and CPU boards.
24-pin DVI-I with special functions, female
System unit X945 board
5PC600.SX01-00 RGB, DVI, SDL
5PC600.SX02-00 RGB
5PC600.SX02-01 RGB, DVI, SDL
5PC600.SF03-00 RGB
5PC600.SX05-00 RGB
5PC600.SX05-01 RGB, DVI, SDL
5PC600.SE00-00 RGB, DVI, SDL
5PC600.SE00-01 RGB
5PC600.SE00-02 RGB, DVI, SDL
Figure 37: Monitor / Panel connection
Caution!
The RGB, DVI and SDL cables can only be plugged in and unplugged when the
APC620 and display device (Automation Panel 900, Automation Panel 800, monitor)
are turned off.
M onito r / Pa ne l