B&R 5AP92D.1505-I00, Руководство пользователя

Страница: 55 / 158

Technical data
Automation Panel 9xD - Hygienic design User's manual V 1.80 55
4.1.5.2.7 LED status indicators
LED status indicator
500 ms per interval
Assignment LED Color Status Explanation
1 2 1 2
On Power supply OK
The device is started up; the battery state is "BAD".
Green
Blinking
Information:
For additional information, see "Battery com-
partment" .
On The system is in power saving mode (standby).
1)
Red
Blinking The MTCX is running; the battery state is "BAD". The
system is in power saving mode (standby).
1)
Faulty or incomplete BIOS, MTCX or I/O FPGA update,
battery state OK, power supply OK
Faulty or incomplete BIOS, MTCX or I/O FPGA up-
date, battery state OK, power saving mode (standby)
1)
Faulty or incomplete BIOS, MTCX or I/O FPGA up-
date, battery state BAD, power supply OK
Faulty or incomplete BIOS, MTCX or I/O FPGA up-
date, battery state BAD, power saving mode (stand-
by)
1)
Power
Red-Green Blinking
Information:
An update must be performed again.
Disk Yellow On Indicates drive access (CFast)
On Indicates an active SDL connection on the panel con-
nector.
An active SDL connection was interrupted due to pow-
er loss of the panel.
Link
Yellow
Blinking
Information:
Check the power supply or power connection of the connected panel.
Green Blinking Automation Runtime is starting up.
Controlled by Automation Runtime (ARemb and AR-
win).
Green On Application running
Controlled by Automation Runtime (ARemb and AR-
win).
Red On Application in SERVICE mode
Controlled by Automation Runtime (ARemb and AR-
win).
Run
Orange Blinking A license violation has occurred.
1) S5: Soft-off
S4: Hibernate (suspend-to-disk)