Maintenance
Automation Panel 1000 user's manual V2.00
139
8.2 User tips for increasing the service life of the display
8.2.1 Backlight
The service life of the backlight is specified by its "half-brightness time". An operating time of 50,000 hours would
mean that the display brightness would still be 50% after this time.
8.2.1.1 How can the service life of backlights be extended?
•
Set the display brightness to the lowest value comfortable for the eyes.
•
Use dark images.
•
Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
8.2.2 Image persistence
Image persistence refers to the "burning in" of a static image on a display after being displayed for a long time. It
does not only occur with static images, however. Image persistence is also referred to in the technical literature as
screen burn-in, image retention, memory effect, memory sticking or ghost image.
There are 2 different types:
•
Area type: This type can be seen in a dark gray image. The effect disappears if the display is switched
off for a long time.
•
Line type: This can result in permanent damage.
8.2.2.1 What causes image persistence?
•
Static images
•
No screensaver
•
Sharp transitions in contrast (e.g. black/white)
•
High ambient temperatures
•
Operation outside of specifications
8.2.2.2 How can image persistence be reduced?
•
Switch continuously between static and dynamic images.
•
Prevent excessive differences in brightness between foreground and background elements.
•
Use colors with similar brightness.
•
Use complementary colors for subsequent images.
•
Use screensavers.
8.3 Pixel errors
Information:
Displays can contain faulty pixels (pixel errors) due to the manufacturing process. They are not
grounds for initiating a complaint or warranty claim.
8.4 Repairs/Complaints and replacement parts
Danger!
Unauthorized opening or repair of the device may result in personal injury and/or serious damage to
property. Therefore, do not carry out any repairs yourself. Repairs are only permitted to be carried out
by authorized qualified personnel at the manufacturer's premises.
To process a repair/complaint, please create a repair order or complaint via the B&R Material Return Portal on the
).
