Technical data • Complete system
32
Panel PC 2100 swing arm user's manual V1.00
2.4.5 USB interfaces
The Panel PC features a USB 3.0 (Universal Serial Bus) host controller with multiple USB interfaces, of which a
USB 3.0 and a USB 2.0 interface are accessible externally for the user.
Warning!
Peripheral USB devices can be connected to the USB interfaces on this device. Due to the vast number
of USB devices available on the market, B&R cannot guarantee their performance. All USB devices
provided by B&R are guaranteed to function properly.
Caution!
Because this interface is designed according to general PC specifications, extreme care should be
exercised with regard to EMC, cable routing, etc.
USB1
Universal Serial Bus (USB1)
1)
Type
USB 3.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s),
high speed (480 Mbit/s), SuperSpeed (5 Gbit/s)
2)
Current load
3)
USB1
Max. 1 A
Cable length
USB 2.0
USB 3.0
Max. 5 m (without hub)
4)5)6)
Max. 3 m (without hub)
1x USB type A, female
USB2
USB1
Table 25: USB1 interface
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
Compatibility with SuperSpeed USB depends on the operating system being used.
3)
Each USB interface is protected by a maintenance-free "USB current-limiting circuit breaker" (max. 1 A).
4)
With the revision < A0 for 5PPC2100.BY01-001 and 5PPC2100.BY11-001 system units, the max. cable length has been specified at 3 m.
5)
With revisions < A1 for 5PPC2100.BY22-001 and 5PPC2100.BY34-001 system units, the max. cable length has been specified at 3 m.
6)
With revisions < A2 for 5PPC2100.BY44-001 system units, the max. cable length has been specified at 3 m.
USB2
Universal Serial Bus (USB2)
1)
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s), high speed (480 Mbit/s)
Current load
2)
USB2
Max. 1 A
Cable length
USB 2.0
Max. 5 m (without hub)
3)4)5)
1x USB type A, female
USB2
USB1
Table 26: USB2 interface
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
Each USB interface is protected by a maintenance-free "USB current-limiting circuit breaker" (max. 1 A).
3)
With the revision < A0 for 5PPC2100.BY01-001 and 5PPC2100.BY11-001 system units, the max. cable length has been specified at 3 m.
4)
With revisions < A1 for 5PPC2100.BY22-001 and 5PPC2100.BY34-001 system units, the max. cable length has been specified at 3 m.
5)
With revisions < A2 for 5PPC2100.BY44-001 system units, the max. cable length has been specified at 3 m.
Front USB
PPC2100 swing arm devices with keys come with a USB 2.0 interface on the front. For more information, see the
