B&R Industrial Automation GmbH Power Panel 65, Руководство пользователя

Страница: 89 / 112

Standards and certifications • Requirements for immunity to disturbances
Power Panel 65 User's manual V2.21 89
5.4 Requirements for immunity to disturbances
Immunity Test carried out in
accordance with
Limits in accordance with
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Electrostatic discharge (ESD) EN 61000-4-2
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity to high-frequency electromagnetic
fields (HF field)
EN 61000-4-3
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity to high-speed transient electrical dis-
turbances (burst)
EN 61000-4-4
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity to surge voltages EN 61000-4-5
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity to conducted disturbances EN 61000-4-6
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity against magnetic fields with electri-
cal frequencies
EN 61000-4-8
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity to voltage dips, short-term interrup-
tions and voltage fluctuations
EN 61000-4-11
EN 55024: Information technology equipment
EN 61000-6-2: Generic standard (industrial areas)
EN 61131-2: Programmable logic controllers
Immunity to damped vibration EN 61000-4-12
EN 55024: Information technology equipment
Evaluation criteria in accordance with EN 61000-6-2
Criteria A:
The operating equipment must continue to work as intended during the test. There should be no interference in
the operating behavior and no system failures below a minimum operating quality as defined by the manufacturer.
Criteria B:
The operating equipment must continue to work as directed
after
the test. There should be no interference in the
operating behavior and no system failures below a minimum operating quality as defined by the manufacturer.
Criteria C:
A temporary function failure is permitted if the function restores itself, or the function can be restored by activating
configuration and control elements.
Criteria D:
Degradation or failure of functionality which can no longer be restored (operating equipment destroyed).
5.4.1 Electrostatic discharge (ESD)
Test carried out in accordance with
EN 61000-4-2
Limits in accordance with
EN 61000-6-2
Limits in accordance with
EN 61131-2
Limits in accordance with
EN 55024
Contact discharge to powder-coated
and bare metal housing parts
±4kV, 10 discharges,
Criteria B
±4kV, 10 discharges,
Criteria B
±4kV, 10 discharges,
Criteria B
Discharge through the air to plastic
housing parts
±8kV, 10 discharges,
Criteria B
±8kV, 10 discharges,
Criteria B
±8kV, 10 discharges,
Criteria B
5.4.2 High-frequency electromagnetic fields (HF field)
Test carried out in accordance with
EN 61000-4-3
Limits in accordance with
EN 61000-6-2
Limits in accordance with
EN 61131-2
Limits in accordance with
EN 55024
Housing, completely wired 80 MHz to 1 GHz, 10 V/m, 80%
amplitude modulation with 1 kHz,
duration 3 seconds, criteria A
80 MHz to 1 GHz, 1.4 to 2 GHz, 10
V/m, 80% amplitude modulation with
1 kHz, duration 3 seconds, criteria A
800 to 960 MHz (GSM), 10
V/m, pulse modulation with
50% duty cycle, criteria A
80 MHz to 1 GHz, 1.4 to 2 GHz, 3 V/
m, 80% amplitude modulation with
1 kHz, duration 3 seconds, criteria A