B&R Industrial Automation GmbH Power Panel 65, Руководство пользователя

Страница: 101 / 112

Accessories • TB704 4-pin X2X Link connector
Power Panel 65 User's manual V2.21 101
6.4 TB704 4-pin X2X Link connector
This single-row 4-pin terminal block is needed as a terminal for the X2X Link interface.
6.4.1 Order data
Model number Short description Figure
Terminal blocks
0TB704.9 Accessory terminal block, 4-pin, screw clamps 2.5 mm²
0TB704.91 Accessory terminal block, 4-pin, cage clamps 2.5 mm²
Table 31: 0TB704.9, 0TB704.91 - Order data
6.4.2 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the complete system. The data specifications for the complete system take
precedence over those of individual components.
The technical data in this manual is current as of its creation/publication. We reserve the right to make
changes.
Model number 0TB704.9 0TB704.91
General information
Certification
CE Yes
UL cULus E115267
Industrial Control Equipment
Terminal block
Note Nominal values according to UL
Number of pins 4
Type of terminal block Screw clamps Cage clamps
1)
Cable type Only copper wires (no aluminum wires!)
Distance between contacts 5.08 mm
Connection cross section
AWG wire 26 to 12 AWG
Wire end sleeves with plastic covering 0.20 to 1.50 mm²
Solid wires 0.20 to 2.50 mm²
Fine strand wires 0.20 to 1.50 mm² 0.20 to 2.50 mm²
With wire end sleeves 0.20 to 1.50 mm²
Electrical characteristics
Nominal voltage 300 V
Nominal current
2)
10 A / contact
Contact resistance ≤5 mΩ
Table 32: 0TB704.9, 0TB704.91 - Technical data
1) Cage clamp terminal blocks cannot be used side-by-side.
2) The limit data for each I/O module must be taken into consideration.
6.4.3 Contents of delivery
Quantity Component
1 Terminal in desired design.
Table 33: 0TB704.9, 0TB704.91 - Contents of delivery