B&PLUS RCS600, Спецификация устройства

Страница: 10 / 30

- 10 -
Wireless charging system 600W specification
For 12V・24V・ 48V battery
7 7
14
7 7
14 232
135
80
160
260
16.5
12.5
210 24
1.
6
型式：RCS600-CA24
RCS600
CA
24
Setting
Charge voltabe max.
28.8V
Charge current max.
20.0A
Recharge voltabe
24.0V
●充電ユニット
Type code normal open
normal close
RCS600-CA12
RCS600B-CA12 RCS600-CA24
RCS600B-CA24
RCS600-CA48
RCS600B-CA48
Applicable passive head RCS600-CH, RCS600-CH-L
Applicable battery
Lithium ion battery, Lead battery
Output voltage Max.15V Max.35V Max.60V
Output current Max.34A Max.25A Max.12A
External input normal open :Charge start signal (activation signal)
normal close: Charge stop signal
External output Ready, Charge, End, Error, E1 ～ E3
LED display Ready, Charge, End, Error, E1 ～ E3
Operating temperature 0...50℃
Storage temperature -10...50℃
Operating humidity 35 ... 90% RH or less However, no condensation
Isolation ≧ 50M Ohm
Dielectric strength AC1500V/1min
Shock rating 10 G, in the X, Y, and Z directions 11 ms
Vibration rating 19.6 m / sec
2
(10 to 55 Hz), 20 times in X and Y directions
protection class IP40（Indoor installation type）
Weight 2.8kg 2.7kg 2.7kg
Connec-
tion
For power supply Round 3-pin
For communication Round 5-pin
I/O connector( exter-
nal I/O signal)
D-sub 25-pin
Battery Battery connection terminal block (terminal screw size M5)
Thermistor Terminal block for thermistor connection (terminal screw size M4)
Cooling method Natural air cooling
Protection
circuit
Battery Battery high / low temperature protection
Over voltage protection
Over current protection
Material Case Aluminum
Accessories Thermistor(Not included in the -NOP type)
Dsub 25P-Connector for start signal ON (included only to normal open type)
Charging unit
RCS600
CA
12
RCS600
CA
24
RCS600
CA
48
※ The printed content of the side
label depends on the model
*normal open and normal close have different colors on the front and rear panels.
(normal open: gray normal close: black)