B&PLUS RCS600, Спецификация устройства, Страница: 18 / 30

- 18 -
Wireless charging system 600W specification
For 12V・24V・ 48V battery
BATT
12V
+ -
BATT
12V
+ -
AC 90～220V
受電ヘッド
RCS600-CH
給電ヘッド
RCS600-AH
電源ユニット
RCS600-AC
■充電ユニット
・RCS600-CA24（24V仕様）
・RCS600-CA12（12V仕様）
・RCS600-CA48（48V仕様）
サーミスタ
※バッテリは各仕様による
24V仕様・・・12V x 2(直列）
12V仕様・・・12V x 1
48V仕様・・・12V x 4(直列）
E04SR401938
(フェライトコア)
2T/100mm以内
RFC-H13
(フェライトコア)
2T/100mm以内
RFC-H13
(フェライトコア)
2T/100mm以内
E04SR401938
(フェライトコア)
2T/100mm以内
フェライトコア付き
電源ケーブル
Dsub25P起動信号ON用
コネクタ
RCS600-OP001
- 3 -
図 1 全体構成図（標準仕様）
図 2 全体構成図（長距離仕様）
Ferrite clamp
Within 2T/100mm
※ 3
Common to standard specification heads and long distance specification heads
· Turn on the power after completing the wiring.
· Battery and charging cable are not included in this product. Please prepare and process by customer.
· Make sure that the ends of the charging cable do not touch each other.
· Please be sure to attach the thermistor to the attached parts. It is recommended to paste on the upper part of battery.
Please do not touch it the terminal
· Connect each cable with the specified length. There is a possibility that an error may occur due to output reduction or the like.
・The "turn", which counts the number of turns of the ferrite clamp of each cable, indicates the number of times that the cable
passes through the inside of the ferrite clamp.
For example, if it is wrapped around the ferrite clamp once, it will take 2 turns, and if it passes through the cable without
wrapping it once, it will take 1 turn.
7.Connection diagram
Standard Specification Head
2T=2 ターン
※ 2 Charging cable is not included.
A cable of 5.5 sq or more is recommended.
Dsub25P 起動信号 ON 用
コネクタ
型式：RCS600-OP001
※ 2
※ 1
90 ～ 220V AC
(If you want to use it at AC200V, you need to
process the tip)
RCS600
CA
12
RCS600
CA
24
RCS600
CA
48
2T
2T
Charging unit
RCS600(B)-CA12(12V)
RCS600(B)-CA24(24V)
RCS600(B)-CA48(48V)
Battery depends on each specification
12V type…12V × 1 24V type…12V × 2
(series)
48V type…12V × 4
(series)
2 turn
2 turns
2 turn
2 turn
Power cable with ferrite core clamp
（Cable lenth 180cm - Included clamp）
Ferrite core clamp
Within 2T/300mm ※ 3
AYCS-212 BK
Ferrite core clamp
Ferrite clamp
Within 2T/100mm
※ 3
Within 2T/100mm
Connector for
power supply
Connector for
communication
RFC-H13
E04SR401938
Power Supply unit
RCS600-AC
Active Head
RCS600-AH
Passive Head
RCS600-CH
2T=2 turns
connector for
communication
connector for
power supply
Lead battery
or
Lithium Ion Battery
Thermistor
Type code：
RCS600-OP002
Battery
Dsub25P-Connector for
start signal ON
RCS600-OP001
※ 1 This is a D-sub connector in which PIN1 and PIN14 are
shorted circuit internally. When this connector is attached to
the charging unit, charging starts automatically when the head
is facing. (Required only for normal open type. Not required for
normal close type)
※ 3 Be sure to refer to “Installing the Ferrite Core Clamp” on
the next page.