Bandit
9
Copyright 3/17
MODEL SA-25
Avoid moving parts. Keep hands, feet, and clothing
away from power driven parts. Keep all guards and
shields in place and properly secured.
DANGER
!
SAFETY PROCEDURES
SAFETY PROCEDURES
DANGER
!
Never grind materials that might contain wires,
stones, nails, or other metal objects which may
damage the teeth and become dangerous projectiles.
Remove all rocks and stones from stump grinding
area.
DO NOT go near or in‑line with the debris field of
the stump grinder while in operation. While grinding
stumps, the chips and portions of the stump fly from
the cutter wheel and can cause severe injury.
DANGER
!
DANGER
!
DO NOT go near the rotating cutter wheel for any
reason. DO NOT go near the cutter wheel while the
engine is running or the cutter wheel is coasting to a
stop. Contact with a rotating cutter wheel will result
in serious bodily injury or death.
The machine should never be parked on a slope
at any time. The machine can coast or creep causing
equipment and/or personal injury.
Make sure everyone is clear of machine before
moving the machine. Stay clear of undercarriage
travel system when the machine is moving.
DO NOT entangle feet or hands in undercarriage
travel system.
NEVER sit, stand, lay, climb or ride anywhere
on this machine while it is running, operating, or in
transit. You will be injured.
Use
EXTREME CAUTION
when traveling over
non-level surface! This machine can tip over or tip
backwards on non-level surface. You will cause
engine damage, machine damage and possible
personal injury!
Any increase from the specified maximum
machine operating angles may cause loss of
lubrication function and damage the engine.
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
WARNING
!
Check laws and regulations. Know and obey all
federal, state, and local laws and regulations that
apply to your work situation and the transportation
of a machine this size.
WARNING
!
CLEAN MACHINE OF ALL DEBRIS!
DO NOT leave
this machine unattended until all potential fire debris is
removed, no fire or smoldering exists, and hot spots
are cold. The engine creates many hot spots including:
exhaust manifold, exhaust, turbo (if equipped), etc.
Remove all flammable debris such as wood, chips,
leaves, oils, fuels, etc. from engine exhaust, engine
turbo (if equipped), beside, around, and under engine,
around and under tanks, inside belt shields and
guards, inside battery and tool boxes, inside cabinets
(if equipped), and anywhere materials collect. ALWAYS
keep several type A:B:C fire extinguishers operational
and on the job at all times.
WARNING
!
Follow all safety, maintenance, and operation
procedures in the skid steer operator’s manual,
including how to attach and disconnect implement
attachments.
WARNING
!
Do Not operate the cutter head unless the skid
steer has a forestry approved door and window that
is in good condition. Repair or replace if damaged.
DANGER
!
Do Not operate the cutter head unless the
skid steer has a Level II Falling Object Protective
Structure (FOPS). Repair or replace if damaged.
DANGER
!
Follow all machine capabilities in the skid steer
operator’s manual, referring to maximum slope grades
capable for ascending, descending, or side slopes.
There is a maximum slope grade the machine can
be operated on if the hydraulic system, self propelled
undercarriage, and engine are running at maximum
performance and good traction is sustained. Do not
attempt to operate the machine on an ascending,
descending, or side slope of more than the specified
maximum, it is Dangerous and could be Fatal.
WARNING
!
Do Not continue to operate the machine if the cutter
wheel stalls. Immediately lift cutter wheel out of the
stump, dirt, etc. and start again with less bite. Prolonged
cutter wheel stall will ruin the hydraulic components,
creating extreme heat and possible fire hazard.
WARNING
!
DO NOT start to grind a stump unless you are
completely sure there are not any utility lines in
the area above or below the ground level where
you are grinding. Always contact the utility locating
service in your area or local utility companies to mark
underground utility lines.
DANGER
!
Содержание SA-25
Страница 7: ......
Страница 16: ...Bandit 14 Copyright 3 17 MODEL SA 25 RIGHT LEFT BACK FRONT MACHINE OPERATION MACHINE ORIENTATION REFERENCE...
Страница 20: ...Bandit 18 Copyright 3 17 MODEL SA 25 RIGHT LEFT BACK FRONT MAINTENANCE MACHINE ORIENTATION REFERENCE...
Страница 32: ...Bandit 30 Copyright 3 17 MODEL SA 25 SERVICE RECORD SERVICE RECORD DATE DESCRIPTION AMOUNT...