Bandit SA-25, Инструкция по эксплуатации и каталог запасных частей

Страница: 17 / 32

Bandit
15 Copyright 3/17
MODEL SA-25
ATTACHING & DETACHING
Different skid steer loaders have different attachment systems, consult the manufacturer’s manual for
specifics on attachment procedures. The skid steer must be able to meet the required amount of hydraulic
oil (see HYDRAULIC SECTION). The stump grinder attaches to the front of any skid steer that accepts a
universal quick attachment plate. The quick attach locks secure the stump grinder onto the front end of the
skid steer. It is important that the stump grinder is properly in place and locked. Failure to do this could result
in the stump grinder becoming detached from the skid steer, causing damage to the unit, skid steer, and
potentially causing injury to the operator and others in the area.
The stump grinder operates off the skid steer existing hydraulic system. Locate the hydraulic line couplers,
clean the hydraulic quick couplers, and attach the stump grinder’s hydraulic hoses. Follow proper safety
procedures when coupling the hydraulic hoses. Failure to do this could result in serious injury or death to the
operator.
The stump grinder does not come with quick coupler attachments, and the operator should install quick
coupler fittings appropriate for the skid steer. The quick coupler fittings can be purchased from Bandit Industries,
Inc. if the required sizes are available. Refer to the skid steer manufacturer’s manual for the proper procedures
for attaching and detaching hydraulic hoses.
NOTICE
MACHINE OPERATION
TO ATTACH THE STUMP GRINDER:
1. Travel the skid steer to the stump grinder attachment.
2. Position the attachment wedges into the locking hooks on
the universal attachment plate.
3. Engage the quick attach locks.
4. Clean the hydraulic quick couplers and attach the hydraulic
hoses to the skid steer. Consult the skid steer manufacturer’s
manual for the proper procedures.
5. Make sure to lock the couplers by twisting the sleeve at
least 1/4 of a turn after connecting. Failure to do this may
result in damage to the hydraulic components.
Follow all safety, maintenance, and operation procedures in the skid steer operator’s manual, including how
to attach and disconnect implement attachments.
WARNING
!
TO DETACH THE STUMP GRINDER:
1. Lower the stump grinder attachment to the ground.
2. Do not exit the operator’s cab unless: the cutter head has
come to a complete stop, the cutter head is setting on the
ground, and the ignition key is in the operator’s possession.
3. Line up the shoulder groove on the sleeve with the detent
ball and disconnect the hydraulic hoses from the skid steer.
Consult the skid steer manufacturer’s manual for the proper
procedures.
4. Disengage the quick attach locks.
5. Back the skid steer away from the stump grinder
attachment.