F4 PLUS
11
UK
1
2
3
4
5
8
9
10
11
12
6
7
Output - OPENS motor 1
(motor to be used for pedestrian gate) *
COMMON output - motor 1
(motor to be used for pedestrian gate) *
Output - CLOSES motor 1
(motor to be used for pedestrian gate) *
Output – OPENS motor 2
Output – CLOSES motor 2
COMMON output - motor 2
LINE INPUT 230 V ~ NEUTRAL
LINE INPUT 230 V ~ PHASE
GROUND
GROUND
COMMON for FA1-FC1-FC2-FA2- inputs
of PHOTOCELL
IF DIP 9 OFF = PHASE output for COURTESY
LIGHT (+2 minutes after run time)
IF DIP 9 ON= Fixed output
for FLASHLIGHT code 70106
IF DIP 9 OFF = NEUTRAL output for
COURTESY LIGHT (+2 minutes after run time)
IF DIP 9 ON= Fixed output
for FLASHLIGHT code 70106
15
16
17
18
19
20
23
24
25
26
27
21
22
LIMIT SWITCH input-opens motor 2 (NC)
LIMIT SWITCH input-closes motor 1(NC)
LIMIT SWITCH input-opens motor 1 (NC)
PHOTOCELL input (NC)
START input (NO)
24 Vac output for power supply of
PHOTOCELLS and ACCESSORIES (max. 8W)
(2 pair of phot radio receiver)
STOP input (NC; if not used connect with
jumper to terminal 25)
Input for PEDESTRIAN GATE START
(NA, acts on motor 1)
COMMON input for STOP-START-START
PEDESTRIAN GATE
ANTENNA CORE input
ANTENNA BRAID input
Common output (0 Vac) for power supply of
PHOTOCELLS, ACCESSORIES and
ELECTRIC LOCK
12 Vac output for ELECTRIC LOCK (max. 15W)
13
14
LIMIT SWITCH input - closes motor 2 (NC)
28
-
29
Relay clean-contact to:
- connect a flashlight with fixed light (code
70107) drawing power from the terminals 7 and
8 (the relay flashes fast during opening and
slowly during closing). Control a warning light
to signal gate movement.
- connect a 24 Vac lamp powered by terminals
20-21 (max. 1Watt)
The motor capacitor is connected between terminals 1-3 (Motor 1) and 4-6 (Motor 2).
* If the system controls a double-gate system with phase shift (V3 turned clockwise), motor 1 starts opening two
seconds before motor 2, while during closing it starts the mouvement with the delay set by adjusting trimmer
V3.
ELECTRICAL CONNECTIONS: TERMINAL BOARDS
