B&G Vulcan Series, Руководство по установке

Страница: 53 / 64

•
User data file version 2 (no depth)
: Use with legacy GPS
chartplotters.
•
GPX (GPS Exchange, no depth)
: Use with some other
manufacturers’ GPS products, and PC applications.
After you select the file type, select Export and destination memory
card. The receiving GPS/PC typically needs to be set to allow import
of Waypoints.
Settings database export
Select
Setting database
to export the Settings database, or export
CZone configuration (CZone installation dependent). Choose the
desired option and select the memory card destination.
Importing a database
Later, if the unit has been restored to factory defaults or user data is
accidentally deleted, return to the files page, select the backed up
file, and then
Import
. View file details for creation date.
Software upgrades
The update file must be loaded to the root directory of the memory
card.
The update may be initiated at boot up: insert the memory card into
the card reader before turning the unit on, boot the unit, and follow
the on-screen instructions.
Alternatively, in the Files menu, locate the update file on the
memory card inserted in the card reader and select
Upgrade
,
followed by
This Display
. Accept the prompt to reboot the unit,
and wait a few moments as the unit restarts. Do not remove the
memory card or repower the unit until the process is completed
(this typically takes no more than a couple of minutes).
Software upgrade of remote device
It is possible to run an update remotely from one unit and apply it
to another, provided they are on the NMEA network. This is only
possible for units without a card slot.
Remote updating is similar to updating a local unit; select the file on
the memory card and select the
Upgrade
option, followed by
Remote Upgrade
. Follow the onscreen options.
Software Setup | Vulcan Series Installation Manual
53