B&G RAM T2, Руководство пользователя

Страница: 17 / 20

17
DISMOUNTING THE UNIT FROM ITS BASE
The RAM T1/T2 features a quick-dismount base.
To remove the base from the unit first take off the coil which is secured
by a 17 mm A/F nut. Next undo and remove the Allen screw ‘A’ and
the retaining plate ‘B’ . Withdraw the mounting pin ‘C’ which will release
the base.
NOTE!
The pin is a close engineered fit and if it proves difficult to remove take
off the plastic cap from the head of the pin and insert screw ‘A’ into it.
It will then be possible to withdraw the pin using a pair of pliers or
grips.
IMPORTANT!
Avoid damage to the pin
Assembly is a reversal of the removal process. Ensure the plastic cap
is re-fitted to the pin upon completion.