B&G Hydra 2000, Руководство пользователя

Страница: 114 / 147

Hydra 2000 User Manual
Part 5 - Options
HB-0844-02
5-17
processor may be set to the same function as any one of the
Linear 5 to 16 inputs.
Calibration value 2 (CAL VAL 2) displays MIN VAL with a number
that can be adjusted between -999 and 9999. This is the number
to be displayed for a 0V input. The default setting is 000.
Calibration value 3 (CAL VAL 3) displays MAX VAL with a number
that can be adjusted between -999 and 9999. This is the number
to be displayed for 6.5V input. The default setting is 1000.
5.9.3 Calibrating a Linear Channel
Adjusting the MIN and MAX values allows the displayed value to
be scaled to the appropriate range for the sensor attached. Taking
a load cell for example, if the zero load output is 0V, MIN
VAL=000 and if maximum load is 650 kgF at 6.5V then MAX
VAL=650.
Calibration value 4 is only available on Linear 5 and this displays a
value between 05 and 16. This setting determines the number of
linear inputs that are available. For example, changing this value to
10 would display a maximum of 10 linear inputs. The default value
is 05.
Damping is adjustable between 0 and 99 seconds. The default
setting is 01.
Notes
1. When calibration value 1 is changed to select a desired input
sensor, the linear value is no longer updated and a constant
value is displayed until the page key is pressed.
2. Extra functions selected, and then removed, remain in the
display menu but with no data shown until the system is
switched off and then back on again.
3. Linear functions will always be shown if selected by CAL VAL 4
on linear 5. They will show no data if the CAL VAL 1 setting is
configured to 1 or 2.