B&G Hydra 2000, Руководство пользователя

Страница: 29 / 147

Hydra 2000 User Manual
Part 2 - Operating Information
HB-0844-02
2- 13
2.6.2 Calibration Adjustment - Depth
(1) Using the Scroll Up or Scroll Down Keys select
the upper or lower display as required.
(2) If DEPTH is shown in the upper display, press and
hold the
Scroll Down Key to select CALBRATE from the
menu. If DEPTH is in the lower display use Scroll Up .
(3) Press Enter and the display shows DATUM which
flashes.
(4) Press Enter again, DATUM stops flashing and the
current datum value is displayed.
(5) Press Enter and the DATUM value flashes.
(6) Use the Scroll Up or Scroll Down Keys to set the
new DATUM value.
Note
If DATUM is referenced to the water line, the value is positive. If
DATUM is referenced to the keel line, the value is negative and
this is indicated by a minus sign before the left digit.
(7) Press Enter to input the new DATUM value into the
system.
(8) Press Page to return to the normal display.
2.6.3 Calibration Adjustment - Wind Angle
(1) Select APP W/A.
(2) If APP W/A is on lower display press Scroll Up and
scroll to CALBRATE which flashes. If APP W/A is on
upper display, press
Scroll Down and scroll to
CALBRATE.
(3) Press Enter twice and the current alignment value
will be shown.
(4) Press Enter and the current offset angle will flash.
Use Scroll Up or Scroll Down to set the new value.
(5) Press Enter to accept the new value.