B&G Hydra 2000, Руководство пользователя

Страница: 106 / 147

Hydra 2000 User Manual
Part 5 - Options
HB-0844-02
5-9
5.6.3 Function Selection - Remote Push-Button
If a Remote Button is connected to a 20/20 Display any one of the
14 pre-set functions may be selected by pressing and holding
down the associated Button
. The Display will then cycle through
the functions . When the required function is displayed, release the
Button.
If the Button is held down too long and the required function is
missed, press and hold down the Button again
. The Display will
then cycle though the functions in reverse order . When the
required function is displayed, release the Button.
5.6.4 Function Selection - FFD
An alternative to using a dedicated Remote Push-button, is to
control the 20/20 using any one of the standard FFDs on the
system
. Any 20/20 can be controlled from any FFD.
To change the function displayed on a 20/20 using a standard
FFD, proceed as follows:
(1) At the FFD, press and hold down the Page Key for at
least 3 seconds . The FFD Display will change to show
the function displayed on the 20/20 together with the
display number
. The selected Display will start to flash.
(2) Using the Scroll Down Key cycle through the 20/20
numbers and select the required Display Number.
(3) Using the Scroll Up Key cycle through the 14 pre-set
functions until the required function is displayed on the
FFD
. Release the Scroll Up Key .
(4) If the function is missed, press and hold down the
Scroll Up Key and the functions will cycle through in
reverse order . Release the Scroll Up Key when the
required function is displayed.
(5) Press the Page Key . The FFD will now return to
normal operation and the 20/20 will display the selected
function.