BANDELIN SONOREX ZE 1031, Руководство по эксплуатации

Страница: 18 / 36

5 /
Operation
18/36
6486-001 GB/2021-04
4. The insert tub must be filled with sonication fluid until it no longer floats. Fur-
thermore, the insert tub needs to be filled at least until the goods to be
treated are covered with sonication fluid.
Result
» The ultrasonic bath is ready to switch on.
5.5 Switching sonication on and off – ST 15.1
Requirements
• The ultrasonic oscillating tank has been filled.
• The mains plug has been connected to an earthed mains socket.
Procedure
1. If available, place the lid on the ultrasonic bath.
2. Turn the rotary knob for the sonication time to the required sonication time or
to the ∞ symbol for continuous operation.
» The ultrasound is switched on. You will hear the ultrasound noise.
» The green indicator lamp lights up.
» If the rotary knob is not set to ∞ , it will move slowly anticlockwise and dis-
play the remaining sonication time. The ultrasound is switched off as soon
as it reaches “0”.
3. To switch off the sonication, turn the rotary knob for the sonication time to
“0”.
» The green indicator lamp goes off.
Information
– You can turn the rotary knob in both directions.
– You can extend, shorten or switch off the sonication at any time.
– The time switch only works when the mains voltage is connected. Without
mains voltage, the detent of the rotary knob is hard to feel.
5.6 Switching sonication on and off – ST 30 DT
Requirements
• The ultrasonic oscillating tank has been filled.
• The mains plug has been connected to an earthed mains socket.
Procedure
1. If available, place the lid on the ultrasonic bath.
2. Press the on/off button to switch on the ultrasonic bath.
3. Press the button for setting the sonication time repeatedly until the required
sonication time or the ∞ symbol for continuous operation is displayed.
4. Press the start/stop button.
» The ultrasound is switched on. You will hear the ultrasound noise.
» The LEDs indicate the remaining sonication time in seconds.
5. To switch off the sonication, press the start/stop button.